XM Titanium Pivot Screws

Our Titanium Pivot Screws are a direct replacement for the stock stainless steel model. They are available in 3 different finishes, plain, Blue Anodized, and Bronze Anodized.

The 3″ XM-18 has a specific size pivot screw, the XM-18 3.5″ and XM-24 use the same screw. Please make sure to order the right size screw for your knife.

EKLIPSE and ZT 0392 owners, the 3.5″ / XM-24 version will work with your knife.

$20.00
Clear
SKU: ti-pivot-screw
Category: Rick Hinderer XM Hardware, XM-18 3.5″ Hardware, XM-18 3" Hardware, XM-24 4″ Hardware

Please use great care when installing the anodized Ti pivot screws, if your screw driver slips it will more than likely scratch the anodized finish. The Hinderer Armorer’s Tool has a precise fit screw driver blade to help eliminate any movement inside the slot that can damage the finish. If using a standard screw driver, we suggest putting masking tape on the tip to prevent marring of the finish. If you do damage the finish inside the slot you can use 360-600 grit sandpaper to sand the slot uniformly for a 2-tone finish. We are not responsible for any finish scratches during installation.

Related products

Menu